|
Collecting Volume: |
0.051 cm3 |
|
Nominal Calibration Factor: |
60 R/nC |
|
Centroid of Collecting Volume: |
1.0 mm from inside window surface |
|
Collector Diameter: |
5.4 mm
|
|
Window-Collector Gap: |
2.0 mm |
|
Window: |
Conductive Kapton film, 3.86 mg/cm2 |
|
Window Support Rings, Collector, and Guard Material: |
Model A10 – Shonka air-equivalent plastic C552 |
|
Maximum Polarizing Potential: |
Greater than 1000 V |
|
Inherent Leakage Currents: |
Less than 10-15 Amperes |
|
Cable: |
50 Ohms, 29pF/f, 3 m long |
|
Signal Connector: |
Choice of coaxial BNC and triaxial BNC and TNC plugs and jacks. |
|
High Voltage Connector: |
Integral with triaxial connectors (window of chamber is common with connector body). Banana, MHV, and SHV plugs are also available. |
|
Venting: |
Chamber is vented at connector via the triaxial cable. |
|
Stem: |
Integral with chamber. Black delrin, 0.350" OD by 3" long. Other lengths are available upon request. |
Features: