 |
|
|
|
| Manufacturers | Radiation Oncology | Medical Physics | Diagnostic Imaging | Radiation Safety | Exercise Systems |
| RediFoam™ Two-Part Foam System |
| Home : Med-Tec : Products : Radiation Oncology : Patient Positioning & Fixation : Vacuum |
 Two-part foam has been a popular choice for patient positioning for a variety of treatments and anatomical areas. Positioning for the breast can be accomplished using RediFoam two-part foam to create a custom mold of the patient in the supine position, from above the head to below the knees.1RediFoam is CFC- and TDI-free. It comes in your choice of shake or stir mixing methods, in three sizes. Also available: foam positioning forms to "cradle" the bag with the curing foam. 1 Bentel, Gunilla: Patient Positioning and Immobilization in Radiation Oncology. McGraw-Hill, New York, 1999. |
| Specifications: |
| Part # | Description |
| MT-FA-20B | RediFoam foaming agents; head kit; small |
| MT-FA-25B | RediFoam foaming agents; head kit; large |
| MT-FA-40B | RediFoam foaming agents; large kit -.65 cubic feet when foamed, our standard size. |
| MT-FA-39B | RediFoam foaming agents; small kit -.46 cubic feet when foamed, for small anatomical areas. |
| MT-FA-41B | RediFoam foaming agents; extra large kit -1 cubic feet when foamed, for large anatomical areas. |
| Foam Forms: |
| Part # | Description | |
| MT-FA-0101 | Left breast form |
 |
| MT-FA-0102 | Right breast form |
 |
| MT-FA-0201 | Hip form |
 |
| MT-FA-0301 | Full body form |
 |
| MT-FA-0401 | Thorax; arms down |
 |
| MT-FA-0402 | Thorax; arms up |
 |
|
Values shown are average values obtained from laboratory specimens and should serve only as a guide. | ||
| R Side | A Side | |
| Formulating Ratio by Volume | 100 parts | 78 parts |
| Formulating Ratio by Weight: | 100 parts | 90 parts |
| Viscosity at 72º F | 2000 cps | 200 cps |
| Reactivity, Mechanical Mix, 72º F | |
| Cream Time, sec | 40-45 |
| Gel Time, sec | 200-210 |
| Tack Free Time, sec | 315-330 |
| Rise Time, sec | 290-300 |
| Firm Time of Part | 15 minutes depending on molding conditions |
| Free-Rise Core Density | 2.7 pcf |
| Additional Image (Click on image to enlarge) |
|
|
 |
 |
 |
 |
| Harpell Associates Inc., |
| 1272 Speers Road, Unit 2, Oakville, Ontario, Canada, L6L 2X4 |
| Phone (905) 825-2588, Fax (905) 825-0234, Toll Free: 1-800-387-7168 |
| Email: Info@Harpell.ca |
